This is probably the best pyraminx on the market, but only after setup. My setup follows. The center magnets are not glued well so I recommend disassembling the puzzle (the tips pull straight off) and adding additional glue to the center magnets. Mr. Ms are assembled randomly, so there is a chance that they will have an incorrect color scheme. If you have this issue, switch two caps on every center and tip. After reassembly, some of the tips may click in the middle of turns. This is due to defects on the center caps. There are bumps in the middle of the caps. Use a plastic razor blade to scrape them off or sand them down. I use moderate-tight tensions. For piece lube, I used a bit of Weight 5 on the tracks and XMT-10 and Mystic on the pieces. At this point, do some solves on the puzzle to make sure you like the tensions. If you do, I suggest removing the tips, adding a bit of super glue to one of the corners of the primary tip cap and putting them back on the puzzle. After gluing the tips on it is still possible to tension it, but it is more difficult. If you need to adjust the tensions after gluing the tips, remove one colored cap from the tip of the side you need to tension. There is a hole in the primary cap into which you can put a screwdriver. However, you must be careful doing it this, as it is easy to strip the screws. This setup yields a fast but controllable and stable puzzle. John Gaynor used a Mr. M with my setup to win U.S Nationals this year.

i just got mine today and its really good!!! the turning has a very nice feeling and the corner cutting is great!! almost 45 for reverse. the tips however need some breaking in though with some solves, and i recomend dissassembling it to check the the center magnets if theres a decent amount of glue because ive heard about magnets falling off. i added dnm 37 in the pieces and i get my regular times on it probably even better i get sub 4 averages with it

I switch from debating what is better

The game or bell v2

To using the mr m instantly

I average 3.5 seconds on pyra and I can assure you that you won’t be dissatisfied with your purchase.

This pyraminx is scratchy and very fast out of the box. The frosted plastic is hard to grip, and there was some spring noise. After this, it was quite good, but some of the tips come off. Im deciding whether to superglue them on, and whether it will be my main over a huanglong or a bell. I'm sub 4, and not a fan of the frosted plastic.

you will not be disappointed by this pyraminx

Just watch Ghost cuber’s video about the mods, then it becomes one of the best pyra’s for sale.

This is the best pyraminx but the center magnets or not glue in so good but it is sooo good.

This is the best pyramid I have used and has really good magnets for only $10.99! Also has a great frosted texture.