Skip to main content

Shopping Cart

Your cart is currently empty.

Reached main content
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3 GAN14 M MagLev UV 3x3 GAN14 M MagLev UV 3x3 GAN14 M MagLev UV 3x3 GAN14 M MagLev UV 3x3 GAN14 M MagLev UV 3x3 GAN14 M MagLev UV 3x3 GAN14 M MagLev UV 3x3 GAN14 M MagLev UV 3x3 GAN14 M MagLev UV 3x3 GAN14 M MagLev UV 3x3 GAN14 M MagLev UV 3x3 GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3
GAN14 M MagLev UV 3x3

GAN14 M MagLev UV 3x3

GAN

  • $69.99 USD

Stickerless

Stickerless

Versions

UV Coated
$69.99
Matte
$62.99
Make it fast!
We'll set up the puzzle so it's fast out of the box.
+$5.00
Log in to add this item to your wishlist

Product Description

The GAN14 M MagLev UV 3x3 is the pinnacle of 3x3 design. With at least 1296 different set-up combinations, the customization of this cube is practically limitless. With all of the adjustments possible on this cube, we're sure you can find your perfect feel.


This is the UV version. Which has a glossy outer finish.

Comes with:
GAN14 M MagLev UV
ID Card
Beginner tutorial pamphlets
User manual
GAN box
GAN bag
Adjustment tool
AKA: GAN 14 M, GAN 14M, GAN14M

Easy Returns!

Not completely satisfied with this product? We accept returns within 4 weeks (28 days) past the delivery date, for either store credit, or a full refund to the payment method — the choice is yours.

Click to see exclusions and more details on our returns policy

Our Promise to You

All of our products are guaranteed to be free of defects, or we will replace and reship at no cost to you. Please contact us within 4 weeks (28 days) past the delivery date to report any issues with items you have purchased.

Please note that some new cubes when being used for the first few times may experience what is termed a "pop". This is when one or more parts of a puzzle pop out without any damage actually being done to any of the pieces. This also occurs from time to time during normal usage. Pops are typically not considered a defect if the parts which come off can be reassembled by hand.

The corners on 2x2 puzzles should not be twisted as doing so may snap the piece. Damage caused by corner twisting is not considered to be a defect.

Fast & Free Shipping Available!

  • Free standard U.S. shipping (includes Hawaii, Alaska, and AFO/APO) (2-5 business days) is offered for orders with a subtotal of $55.00+. Free expedited shipping (1-3 business days) is offered at $85.00+.
  • All orders are shipped from our New York warehouse.
  • Orders are shipped the same business day they are placed, or the next business day. The cutoff for same day shipping is 3PM EST.
  • There is no processing/handling surcharge — all our shipping rates are at rock-bottom.
For our customers outside the U.S.:
  • We ship to all countries not sanctioned by the U.S. government.
  • We advise that you look into your country's customs laws before ordering.

Click to learn more about our shipping methods

Product Specifications
Manufacturer GAN
Type 3x3
Added 2023-08-08
Gross Weight 250g
Dimensions 56.0mm3
Magnets Magnetic
Item Weight 71.0g

Customer Reviews

Based on 84 reviews
70%
(59)
20%
(17)
4%
(3)
4%
(3)
2%
(2)
J
Joshua R. (India)
Awesome, but slightly disappointed

The new flagship Gan 14 is AWESOME. It has amazing corner cutting and a good turning feel. But it is not much different than the Gan 13. Only new adjustable edge to core magnets and new interchangable magnetic rods. Gan needs to make more updates. People with the 13 should consider whether or not they should buy this. But otherwise, its AWESOME

S
Sean S. (United States)
Overpriced and underwhelming

I don't mean to be too pessimistic with this cube But i was putting a lot of effort into setting it up with little success. With this cube, I knew that what I was getting myself into was, at bare minimum, a few hours of set up. To me, I had no problem with this as I knew I could get a good result with the time and effort I put in. In addition to this, I saw videos such as the thecubicles about this cube and saw that they were underwhelmed with it. Quite frankly, I would have to say that I should have taken the warnings that were stated in the video. I feel like I can't get the puzzle to a place where the cube is stable, fast, and doesn't pop. For me, whenever I get the cube to a relatively good tension / maglev setting the cube locks up a ton due to the auto alignment. With this cube, you are also forced to make it tighter as, no matter what lube you put in it, it will NOT slow down. I will not necessarily say that this cube is bad, but it is still very underwhelming and should not be priced as it is. If this cube were priced at around 30-40 dollars, I wouldn't be too happy but I also wouldn't be annoyed. Overall, if you are looking for a new cube and are looking at the gan puzzles, just get a gan 12 UV, its 60 at the moment and is better.

L
Leo B. (United States)
Bought it in person

Bought it at the cubicle on trip to nyc it is better than the 13 and feels like a more stable 12 would 100% recommend upgrading to the this it’s my new main

i
ivan (United States)
it good

it a good cube

N
Nicholas H. (United States)
Gan 14

It’s sad that the case no longer has magnets like the 13 but the cube is a bit better then the 13 wouldn’t recommend upgrading if you have the 13 but if you don’t then the 14 is good

D
D.M. (United States)
Gan 14 M Maglev UV Coated

With 1296 different adjustment settings, this cube seems like it could be anybody's main. However, most the the settings, especially the weak magnet and loose tension and center distance settings, are not likely to be used. It's primarily just a gimmick to have all the customizability, but it does work. Personally, I have the tension at 5, the center distance at 4, and the edge and corner magnets at full strength. With a little bit of the no. 3 gan lube, the slice moves were slowed down just enough to make it perfect. I think it's worth noting that this is a gan cube with literal maglev technology, so don't expect this to be a slow stable cube. Gan is characterized by making crazy fast cubes. This one is no exception. Also, the frosted version feels better while turning, but ultimately the UV-coated version performs better. If your turning style can accommodate the speed and you want to burn $100, this cube is for you.

P
Pawel W. (United States)
Very good cube

I’ve been using GAN cubes for some time. I have 11, 12, 13 and now 14. I also have 365m which was my first cube. The only issue I noticed with GAN 14 is that since I got the cube it popped 4 times for me.

K
K.Y. (Turkey)
Wowwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww

This cube is amazing out of the box!!! And it will be my main. Before this cube i used to do my main Gan 11 m Pro with some gan lube with silicone weight 5. But i think i am going to use this cube as out of the box but maybe some FZ Calm. And i unboxed it while recording a video. And my video is the first in Türkiye (it's new name. Before this name is Turkey)!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Judge.me YouTube video placeholder
R
Ricky (United States)
Best Speed Cube!!!

I bought this from the GAN website and have set it up the way I like it. The corner cutting is better then the previous GAN 13, and a little better than the Tornado v3 (which was my main). The turning is light and really fast. It doesn’t lock up as much as the 13, especially with the H-perm. My settings for center travel is 3, tension set to 5, and all magnets set to the highest setting. Definitely an upgrade and my new main!
(Update) Because of the popping issue I had to set the center travel to 1 and tension to 4. Also the super weilong 20 magnet core edition has fixed everything I’ve had trouble with on this cube.

A
Anonymous (United States)
GAN14 Maglev

new main however tho slice moves on mine are too fast for me