Really good 2x2 even in 2020, not up to par with the likes of the Valk but very nice in general, would say it has a similar feeling to the OP dayan, if you want it you should get it.

This cube is trash don't get it

This cube has great performance overall! It has a very tactile and fast feeling, but I don't give it 5 stars because of two things,

1. The cube locks up on me sometimes because it is not very flexible, the main reason it is not flexible is the fact that it is on tight tensions.

2. The cube is on tight tensions because if it gets loosened the screw will rub on the corner and bits of the plastic will get in the cube. (This does not effect the performance though.)

If none of these reasons will bother you, you should get it! It will probably be your main.

This 2x2 is great. I purchased it a while ago, and I have been using it a lot. Bringing it to school, etc. It turns quickly and is not very bumpy. If you turn it slow, however, you can feel a slight bump.
The stickers are excellent, no chipping what so ever for me, but the one bad thing is the logo. I would recommend peeling off the logo because it starts to attract dirt and peels off, which can bother you while you are solving. Other than that, what I did was make the cube looser in terms of tensions, lubed it with Lubicle Silk, and now it is insane. If you have your own lube, don't waste your money on factory lube.
Corner cutting is very good, 45 degrees (what you would normally expect). Overall, I rate this cube a 5/5. You should just stop reading reviews and get it! :)

OOTB the cube felt buttery. Great performance but one problem. One of the corners broke after a day of having it. I got another one and took the caps off and glued the corner to the stock and put the cap on immediately after. This mod would prevent corners to break but you can no longer magnetize the cube

I would recommend this cube if you don't mind doing the glue mod

The cube is more gummy and slow than any other 2x2 out of the box
but i added DNM-37 and Lubicle Speedy and it was 3rd after my dayan and xinghen m. I got this on my birthday at a tour of thecubicle.

I recieved this cube just today and this turn incredible OOTB it is unstable, but adjust the screws and it will be very controllable. This is definitively one of the best 2x2 on the market :D

Welp, see ya DaYan. Nice knowin ya. This cube is fantastic. First turns were some of the best Ive ever had. It was INCREDIBLY SMOOTH. Like, the smoothest cube Ive ever turned. It was a little loose and needed to be tightened. It didnt pop or catch or lock, though. Overall though, I was thoroughly impressed with first turns. After I lubed and tensioned it, 2x2 became my main event. This cube is FANTASTIC. I lubed the cube with 50k on the hardware, 30k on the pieces, along with DNM-37. This resulted in a fast, smooth, and controllable cube that made me love 2x2 a LOT more. I highly recommend this puzzle.

OOTB, this cube was great. However, when I took it apart and then reassembled from when I lubed the core, the screws were rubbing against the plastic. But I solved this by taking out all of the screws, and then using tensions that are tighter than my usual tensions. Besides this problem, the cube has great corner-cutting, is very fast, and is my new main.

When I first got this it was a little slow but I did about 30 solves and it immediately felt faster. Its very smooth but there is a little bump