Skip to main content

Shopping Cart

Your cart is currently empty.

Reached main content
Maru Core Magnetic DIY Kit for TengYun V1
Maru Core Magnetic DIY Kit for TengYun V1

Maru Core Magnetic DIY Kit for TengYun V1


  • $12.99 USD

This product has been discontinued indefinitely or we aren't sure when it will be back in stock.

Product Description

This Maru Core Magnetic DIY Kit will convert your TengYun V1 to a core magnetic version! This kit adds magnets to the base of your corners as well as around the core. This gives the puzzle a more pronounced magnetic feel with added stability.

You will need superglue for installation.

Easy Returns!

Not completely satisfied with this product? We accept returns within 4 weeks (28 days) past the delivery date, for either store credit, or a full refund to the payment method — the choice is yours.

Click to see exclusions and more details on our returns policy

Our Promise to You

All of our products are guaranteed to be free of defects, or we will replace and reship at no cost to you. Please contact us within 4 weeks (28 days) past the delivery date to report any issues with items you have purchased.

Please note that some new cubes when being used for the first few times may experience what is termed a "pop". This is when one or more parts of a puzzle pop out without any damage actually being done to any of the pieces. This also occurs from time to time during normal usage. Pops are typically not considered a defect if the parts which come off can be reassembled by hand.

The corners on 2x2 puzzles should not be twisted as doing so may snap the piece. Damage caused by corner twisting is not considered to be a defect.

Fast & Free Shipping Available!

  • Free standard U.S. shipping (includes Hawaii, Alaska, and AFO/APO) (2-5 business days) is offered for orders with a subtotal of $55.00+. Free expedited shipping (1-3 business days) is offered at $85.00+.
  • All orders are shipped from our New York warehouse.
  • Orders are shipped the same business day they are placed, or the next business day. The cutoff for same day shipping is 3PM EST.
  • There is no processing/handling surcharge — all our shipping rates are at rock-bottom.
For our customers outside the U.S.:
  • We ship to all countries not sanctioned by the U.S. government.
  • We advise that you look into your country's customs laws before ordering.

Click to learn more about our shipping methods

Product Specifications
Manufacturer Maru
Type Accessories
Added 2022-07-26
Gross Weight 13g

Customer Reviews

Based on 6 reviews
David (United States)
Challenging installation, try at your own risk.

I had high hopes for this kit, and I bought a Tengyun v1 just to install it on. On this kit, compared to others I have installed, the corner magnets orientation was not obvious. Please see the Cubicle's video on all 5 of these Maru kits. What happened with the WRM kit is what happened to mine, with reversed magnet polarity. Unfortunately this video was not out before I tried my install, and I ended up ruining a brand new Tengyun V1. Please test the polarity on every corner magnet to the core before you glue anything to avoid making my mistake! I was able to remove the corner magnets with force and nail polish remover, but I bent/damaged the corner stalks enough that the cube feels nothing like a smooth and buttery Tengyun. I would give this a lower rating, but after watching The Cubicles video honestly I do want to feel what this would be like properly installed and will probably buy both a new Tengyun and kit to try this over again. Be smart and check your polarity before you glue anything! YouTube video placeholder
Joe J.C.
Does what it says on the tin

The core is very easy to install, the corners are a little touchy but not too hard to allign. I had a small slip and got a bit of super glue on one of the outside faces which has permanently fogged it, but that's just a me problem, go slow and be careful and you shouldn't have issues.
I like the slightly increased magnetic feel this provides, but it also feels like the way it pulls on the pieces can cause an audible squeaking/creaking that's noticable considering how quiet the Tengyun V1 normally is.

Luke W. (United States)
A headache and a half

I bought this for the Tengyun hoping it would increase the magnet strength a little bit. However, it multiplies the magnet strength at least 4x over. While it's not bad, it does make the cube harder to solve for longer, and the actual magnets themselves were not clear on how they were supposed to be oriented, leading to me having to abandon the Tengyun cube because of all the super glue inside of it. Don't get it, and stick with the original Tengyun.

Ryan P. (United States)
Great mod but not for everyone

Took me a while to appreciate how good this mod is. It gives a lot of extra stability to the cube in addition to stronger magnets, both of which are issues that some people had for the regular Tengyun. I main a WRM 2021 maglev with core magnets but did poorly at round 1 at a comp so I used a core magnetic Tengyun in round 2. Proceeded to obliterate my PR average, knocking it down from 13.50 to 12.67, which I was not expecting at all given my poor performance in round 1. Easy installation if you're used to magnetizing your own cubes. Biggest downside is the price - $12.99 is frankly ridiculous for a core magnet kit, especially since it probably costs around a dollar to produce. I bought mine when it was $8.99 and I think it was worth it. If you *really* like the Tengyun and wish it were more stable and had stronger magnets, I would buy this, otherwise I think it's a waste of money.

Anonymous (United States)
Do not buy!

Makes the TengYun loud, clacky, and unpleasant... and the magnets are WAY too strong! Don't buy this kit!


It broke my cube. Far too difficult to workout because there is no instructions available on the internet. Wasted 50 dollars and now I have to buy the way beyond overpriced pre installed version so I don't mess it up again.