The MoFang JiaoShi MF3RS2 is a new MoYu sub-branded 3x3 in the Cubing Classroom series. Like the MF3RS, the MF3RS2 features great performance and premium design features that push the boundaries of what a budget-friendly cube can do. With excellent performance and a low price point, the MF3RS2 is sure to be a top choice for both beginners and intermediate cubers, and possibly even for advanced solvers.
Not completely satisfied with this product? We accept returns within 4 weeks (28 days) past the delivery date, for either store credit, or a full refund to the payment method — the choice is yours.
Our Promise to You
All of our products are guaranteed to be free of defects, or we will replace and reship at no cost to you. Please contact us within 4 weeks (28 days) past the delivery date to report any issues with items you have purchased.
Please note that some new cubes when being used for the first few times may experience what is termed a "pop". This is when one or more parts of a puzzle pop out without any damage actually being done to any of the pieces. This also occurs from time to time during normal usage. Pops are typically not considered a defect if the parts which come off can be reassembled by hand.
Fast & Free Shipping Available!
- Free standard U.S. shipping (includes Hawaii, Alaska, and AFO/APO) (2-5 business days) is offered for orders with a subtotal of $45.00+. Free expedited shipping (1-3 business days) is offered at $75.00+.
- All orders are shipped from our New York warehouse.
- Orders are shipped the same business day they are placed, or the next business day. The cutoff for same day shipping is 3PM EST.
- There is no processing/handling surcharge — all our shipping rates are at rock-bottom.
- We ship to all countries not sanctioned by the U.S. government.
- We advise that you look into your country's customs laws before ordering.
(I got this cube from the old thecubicle.us site so this may not show as a verified purchase. But I assure you I got it from there. I just only got around to reviewing it now.)
So I got this cube because of all the hype surrounding it (Two actually. One I magnetized with TheCubicle's Strong Magnet kit to compare) and it did not disappoint! It's incredibly flexible in that it can easily cut 45 degrees or more depending on your tensions/preference. It also reverse cuts about 1/3 of a piece, which is incredible for preventing lock ups. Said lock ups are basically non existent really as there's only a very small area in the middle of a turn where it won't turn in either direction. Speaking of turning, it's so smooth and consistent feeling on smaller corner cuts it's nutters! It's like there is air between the pieces as they glide against each other effortlessly. I also got this cube in stickerless which is glossy and thus has a nice grip. The stickerless colors are easy to tell apart from each other as well even in low lighting due to their nice contrasts and color shades. The only issue I've had is spring noise which is prominent on certain faces even after adding a thick lube to the hardware. But that doesn't affect it's actual performance and is more of a pet peeve.
Over the last year or so I’ve owned 5 magnetic versions of these (2 black, 3 Stickerless). If you’ve got the time and money to magnetize this, then do it. I recieved a custom Boron one from a friend at a recent comp, and so far it’s the smoothest thing ever. Long story short......just get this and some magnets and you’ll never need to buy another 3x3 ever again !!
I got this in July. OOTB it was really fast, unstable and floppy. The next day I magnetized it with strong (N50 5×1) magnets and lubed it with Lubicle 1 on the pieces and Traxxas 50k on the core, tracks and pieces, and I left the tensions as they were. The cube became the exact opposite of its OOTB feeling: very stable, a bit slow, but, most importantly, very very very soft and quiet.
It's now my OH main and two handed backup main because it's simply so controllable.
In the end, I reccomend this cube to anyone looking for a budget, yet fenomenal cube that has a soft and blocky feeling. For the price of only $8+$8 for the magnets, you really can't go wrong.
The MF3RS2 is an OK cube out of the box its does not corner cut at 45 degrees and it is way too unstable
and too fast. If you are a beginner cuber you probably do not know how to setup but it is slightly better after setup but not as goof as the YUXIN LITTLE MAGIC. It is the best cube out of the box without any setup, it is fast and controllable but a downside is the sticker quality which can be easily solved by buying the sticker less one.
I normally like moyu puzzles because they really help me get good times. While this cube is no exception, the mix of smooth and crunchy turning with really smooth but not to great corner cutting just makes me not like this cube. I normally prefer a cube with either a really buttery smooth feel or an extremely crunchy cube that gives me confidence in my turns, and has more snappy corner cutting. This cube was a bad mix of both for me and has bad corner cutting. On the brighter side though, I got my first sub 15 average on this cube and I don't think it's a coincidence. This cube is overall really great. Just not for me.
My friend bought this cube for me (which also happened to be my first cube) when I just started cubing. When I got it, it felt pretty good. But using it a lot, the insides got dustier, and it was harder to move. I asked my friend to lube it a couple of times, but it still was a little stiff. When this happened, the sound it made when it was turning wasn't the best. It sounded as if the insides were hitting each other . Overall, this cube had a good price, but the quality wasn't as great.
THIS SUCKS!!! EVEN though it’s a GREAT budget cube I Haaaaaaaatttteeeee it! Buy a gan 356
Out of the box the cube is smooth. The corner cutting is incredible (reverse is about 45 and normal is passed that). I would definitely recommend this cube.
I had gotten a Stickerless one of these and magnetized it. Have had this for a few months now and have used it in a few comps, achieving a 14.62 PB average. Recently I bought 2 black cubes, a lite and strong magnet kit, and the angstrom lube bundle. After hours of magnetizing and setting it up similar to and angstrom cube, it’s gotten even better than my stickerless one. I plan on using the one with strong magnets for 2 handed, and the lite magnet one for OH.
This cube is extremely good out of the box and requires a very little setup. It is great for beginner speedcubers or anyone who doesn't have a lot of money. However, after about 300 solves the cube slowed down tremendously but this may be caused by the lube drying out and needing to be replaced. I have an in-depth look at it on my youtube channel here: https://youtu.be/3Jh8J6NoYsI