The Moretry Tianma X3 V4 (MagLev) is a 3x3 from the new company that features traditional corner/edge magnetization along with corner base/edge magnets. This version includes enlarged corner base magnets, allowing them to interact with a repelling magnet in the centers to aid with alignment.
Not completely satisfied with this product? We accept returns within 4 weeks (28 days) past the delivery date, for either store credit, or a full refund to the payment method — the choice is yours.
Our Promise to You
All of our products are guaranteed to be free of defects, or we will replace and reship at no cost to you. Please contact us within 4 weeks (28 days) past the delivery date to report any issues with items you have purchased.
Please note that some new cubes when being used for the first few times may experience what is termed a "pop". This is when one or more parts of a puzzle pop out without any damage actually being done to any of the pieces. This also occurs from time to time during normal usage. Pops are typically not considered a defect if the parts which come off can be reassembled by hand.
The corners on 2x2 puzzles should not be twisted as doing so may snap the piece. Damage caused by corner twisting is not considered to be a defect.
Fast & Free Shipping Available!
- Free standard U.S. shipping (includes Hawaii, Alaska, and AFO/APO) (2-5 business days) is offered for orders with a subtotal of $55.00+. Free expedited shipping (1-3 business days) is offered at $85.00+.
- All orders are shipped from our New York warehouse.
- Orders are shipped the same business day they are placed, or the next business day. The cutoff for same day shipping is 3PM EST.
- There is no processing/handling surcharge — all our shipping rates are at rock-bottom.
- We ship to all countries not sanctioned by the U.S. government.
- We advise that you look into your country's customs laws before ordering.
This puzzle is very quick which im very comfortable with very fast uncontrollable puzzles so for some people this might not be the right puzzle but five stars from me.
This cube is amazing but is very fast and strong magnets but you do need some lube to slow it down and the magnet positioning gives it a very unique feel which is nice but I suggest the wrm v9 ballcore which is also fast but can be much easier controlled but is my favorite cube.
Fast, high-performance cube. Has a slightly crunchy feel and the factory lube is not very good. Put in your own lubes and it should be good.
Basically if a cube doesn't replace your main or you can't reach your normal times with it, then the cube has zero reason to exist. Why would anyone spend money for something that is unnecessary besides the main cube? So it's not bad but you won't change a good cube to this.
It could be the best cube if it was not flexible.
This is probably the best cube of 2023 so far. We found it to have a the easiest corner cutting out of any cube we've tried so far. The cube needed some adjustments out of the box to avoid popping. However, after that it's been a great cube. It's not quiet like the Tornado but feels more controllable. It has the Gan 13 maglev airy feel while turning. Without the catches. After the unboxing we quickly noticed how well this cube performed. The coating is a high gloss with similar plastic to the Gan 13. It's really everything the 13 should have been to beat the Tornado V3 pioneer but wasn't.
Unlike some others we haven't had any magnets popping out. We've put this cube through at least 500 solves with no issues an adjustment couldn't fix. There is no question this is a faster puzzle. This is now one of our competition cubes. It beats out Gan 13, Tornado V3 Pioneer, and the Diansheng MS3x
So this is an amazing cube disregarding this one GLARING flaw that I have not seen anyone else mention. When you twist the corner, the magnets POP out (look at image for reference). So as long as you don’t twist the corners, have fun cubing with this great cube!
This is my best cube. For reference, I have the Gan 12, the Moyu WRM, both the Tornado V2 AND V3, the RS3M, the MGC Evo, the Tengyun v2, Qiyi MS, Dayan Guhong v4, and even a store bought Rubiks brand. This cube is the best.
For 33 dollars (28 for the snap), this cube is one you just have to get. The feet magnets add extra stability to this puzzle, and the snap tech pushes the layer into a position where cornercutting can take over (unlike the gan 12, which just aligns from a position where cornercutting would take over anyway), as well as adding some SWEET, SWEET TACTILITY. (Side note: For those who saw my previous review, this has, in fact, beat out the Gan 12 and become my main.) I tend to like faster puzzles, (this is literally the fastest cube on the planet and I put DNM37 in it to speed it up) so if you know you won't like the fastest cube in history, you might want to try the cheaper snap version instead. The M-slices seem completely uncontrollable at first, coming from a slower cube, but after some practice I can do U-perms and Z-perms in microseconds, literally twice as fast as any other cube. In most other aspects, the performance is identical to cubes such as the WRM, Tornado V3 and the Gan 12. But the fancy snap magnets and unrivaled reverse corner cutting edges out the competition to make this the best cube I own. I honestly have no idea why this cube isn't getting more attention. (For those wondering, I average 13 seconds.)
There used to be a problem with the cube where the centers break due to the caps being too tight, but moretry has fixed this problem, and in the newer batches the centers will not break. However, if your centers DO start to break and you were unlucky enough to get one from the earlier batch, thecubicle will provide replacement centers for free. I've installed these new centers on my cube and have not experienced any problems, so it seems to be completely fixed.
SUMMARY: My best cube and my main. I average 13 seconds. It's extremely fast, so if you don't want that, try the non-maglev snap version instead. If you got one from an earlier batch with the faulty centers, just ask for replacement centers, thecubicle will provide them for free. It's reverse cornercutting is simply unrivaled. The snap tech is great, because it pushes the layer into a state where cornercutting can take over, which enhances the performance. At 33 dollars, this cube is awesome. Just awesome.
MY SETUP: I use a few drops of lubicle speedy combined with one or two drops of DNM37. I have the center travel distance set so when I pull apart the edges to test, I can just BARELY see the primary feet of the edges. I have the springs on setting one, although settings 2-4 work great too.
Thanks for your detailed review! I just confirmed that the Tianmas that are shipping now already have the updated centers installed, but if anyone who is reading this has an old version with cracks, feel free to contact us for replacements.
This cube has fast turning and good corner cutting. The only con is it is quite loud.
If you want a "expensive" cube for cheap then this is the one. It's incredibly fast and controllable. The version 4 is the one I chose and I can say you want to get this absolutely. The cube can tolerate A LOT of your mistakes. I have been struggling with my V perm and G perms since they use D moves but this cube just ignores those and make my algorithms much smoother. It's incredibly light, when I switched from the RS3M it felt like I just went up 10 levels of cubing technology. Even with the level 5 tension it still feels incredibly fast (maglev reacts differently to this). Overall I highly suggest this cube over the X man tornado or any other cube around this price. Although It still isn't as good as the Gan 11m Pro but I don't feel any difference between them.
This is easily the best cube I've ever used. It is so fast out of the box, but the magnets inside the cube really help slow the cube down. The box it came in is really cool and has a very premium feel to it. I love the maglev technology. The corner-cutting is almost perfect. At first, it will be really easy to do double rotations instead of single rotations, but I put the cube on the strongest setting (9) and added some Mystic lube to help slow it down. Now, it is a great cube and is my new favourite cube. I think MoreTry has a lot of potential as a cube company and I'm excited to see what they make in the future!