The MoYu RS3 M V5 is the continuation of MoYu’s famous RS3 M line. This new, lightweight version features maglev, a reinforced ball core and UV coating, making it perfect for good grip and stability. Adjust the elasticity 9 ways to customize your feel!
This cube comes with MoYu’s new Robot cube stand.
Click here to check out the entire RS3 V5 collection!
Not completely satisfied with this product? We accept returns within 4 weeks (28 days) past the delivery date, for either store credit, or a full refund to the payment method — the choice is yours.
Our Promise to You
All of our products are guaranteed to be free of defects, or we will replace and reship at no cost to you. Please contact us within 4 weeks (28 days) past the delivery date to report any issues with items you have purchased.
Please note that some new cubes when being used for the first few times may experience what is termed a "pop". This is when one or more parts of a puzzle pop out without any damage actually being done to any of the pieces. This also occurs from time to time during normal usage. Pops are typically not considered a defect if the parts which come off can be reassembled by hand.
The corners on 2x2 puzzles should not be twisted as doing so may snap the piece. Damage caused by corner twisting is not considered to be a defect.
Fast & Free Shipping Available!
- Free standard U.S. shipping (includes Hawaii, Alaska, and AFO/APO) (2-5 business days) is offered for orders with a subtotal of $55.00+. Free expedited shipping (1-3 business days) is offered at $85.00+.
- All orders are shipped from our New York warehouse.
- Orders are shipped the same business day they are placed, or the next business day. The cutoff for same day shipping is 3PM EST.
- There is no processing/handling surcharge — all our shipping rates are at rock-bottom.
- We ship to all countries not sanctioned by the U.S. government.
- We advise that you look into your country's customs laws before ordering.
It's good not the best but for the price it's very good probably the best value for it's price. It's very Crunchy and smooth in my opinion the uv isn't that good. It's bad out of the box but after lube and set up it's good
I didn't use it out of the box, but that's because I got recommendations to set it up before using it. I lubed the core with Lubicle Black, but other core lubes will probably work just as fine. I leave the spring tension on the lowest or second lowest setting because their cubes don't have corner twisting issues and don't adjust the screws more than one 1/2 turn tighter than the factory settings.
This cube is the best cube I've bought this year. It's lighter than the YS3M, the magnets are weaker than the WRM V9, it doesn't have (non-core related) durability issues like the Tornado V3, doesn't catch like the GAN 13, and the Super Weilong is probably not 2.5x better than this to justify its price.
I did an Angstrom Setup+Fz lubes on this cube plus some thicker lube on the pieces, and this cube feels amazing. Budget cube or not, I'd recommend this cube over any other.
For the price this cube is, it has great performance (like all the other RS3 Ms) it has amazing corner cutting. This cube is now my main after setting up with FZ calm and weight 5.
Lighter than other Moyu cubes which feels nice. However it is pretty uncontrollable out of the box. I adjusted it a bit and it helped. This did not help the other problem this cube has. It has almost no corner cutting. Also some of the edge components dont line up flush and you can feel the plastic edges on some of the corner pieces. If youre going to spend 25 bucks on a cube theres better options. The robot case is dope though.
What can I say... you need to buy this cube! I have been wanting to try a MoYu ball-core cube for a long time now, and when this one came our and all of the Cubicle staff loved it (also it was hecka cheap), I HAD to try it. This is only the second day that I have had this cube, and I've already broken my PB single! I went from 8.766 to and 8.280! I am a 14-15 second average cuber, but these past two days I have been dropping down to low 13-12 seconds! i love the UV coating on a budget cube, it is just so helpful with the grip. The magnet strength is perfect, it's not too fast, the adjustment is straightforward and simple, and it feels AMAZING with the MAX setup! I would say that if you get this cube, (for the new cubers out there) you should ABSOLUTELY buy some lubricant for your puzzle. It is just a good idea overall, and helps extend the lifetime of your cube. This is an AWESOME cube by an amazing company and I recommend it 100 out of 10 :) (and you CAN trust me, because I have tried about three quarters of the 3x3s on the market, LOL)
For $25, this cube is amazing and I'd 100% recommend getting it. It feels like the WRM v9, but with lighter magnets and no edge alignment. This cube is perfect for me because the only problem I had with the YS3M and WRM v9 was their strong, unchangeable magnets. Out of the box, this was tight and corner cutting wasn't good, but once you loosen the screws a bit it'll be fine. This is also great for OH since it's easy to turn, has light magnets, and stays stable while turning. After just two sessions of OH, I broke all of my PB's. Even for regular 2-handed 3x3, this cube is great. I wish Moyu didn't have to sell it with the cube robot, but don't let that stop you from getting this.
This cube is really good. For just 25 dollars I get pretty much everything I want in a cube and it’s performance is actually incredible. It’s really fast out of the box so it might be slightly uncontrollable but it’s still really good, and with setup this cube becomes even better. With just 1 day of using this I got my pb ao5 which I have been striving to beat for a long time. 10/10 would recommend.
My friend got me this gift for my birthday (it was like 2 weeks late because of preorder though haha), and i must say it did not disappoint. OOTB it’s very fast and uncontrollable, and was way better when it comes to feeling dry first thing. I do like my cubes fast however, but if you don’t i recommend tightening the blue adjustment piece to around 6 and doing 2 wrist turns worth of tightening. Another thing i noticed with this cube is how much the ball core carries the moves. The U moves effortlessly glide and the middle moves are very fast but a bit too fast.
Overall this cube is a 4.8/5 but i’m gonna give it a 5 because well 4.8 isn’t an option
Edit: After a few days of usage it seems the corners are prone to breaking. i’m not saying the cube is flimsy considering i dropped it off a tiny ledge but it should be a little more durable, but hey what can i say it’s a good cube for 25 bucks, still gonna main it
This is probably the best UV coated Maglev + Mag Core cube for $25 that I've tried. I think the best way to describe it is that it's a better version of the Super V1. If you ask me, this should've been the Super RS3M V2. It'll probably be one of my 2h-mains, but it's definitely my OH-main.
This cube once setup to my liking is a really good cube. It is quite fast but does requirente a bit more exact turning than the super v1 ball core. These two specifically are really similar that wirh the v5 being a tad faster. It's an amazing cube for such a low price and if you're a fan of any of the rs3m cubes I would highly recommend giving this one a try. The uv coaring also gives it a great feel as well. Give it a try, it's quite good!